The Seplos B-48200-A BMS 3.0 Type A is designed for 48V lithium battery packs requiring up to 200A typical charge and discharge current. It supports 16S LiFePO4 and 14S NCM battery configurations, providing a flexible battery management platform for residential and solar energy storage applications.
Unlike the Type B and Type C layouts, Type A integrates the communication ports and status indicators directly onto the main BMS board. Accurate SOC calculation, independent chip sampling, passive balancing, 10A current limitation and Bluetooth monitoring help improve battery safety, cell consistency and system visibility.
Comprehensive Battery Protection
Intelligent protection supports reliable high-current operation while helping protect the battery pack from abnormal voltage, current and temperature conditions.
Smart Battery Monitoring
Bluetooth monitoring and accurate SOC calculation provide convenient visibility into battery status and remaining capacity.
CAN & RS485 Communication
Dual CAN/RS485 inverter communication interfaces support integration with compatible inverters and energy storage systems.
Balancing Support
Passive balancing helps improve cell consistency, while the built-in dry contact can control a compatible external active balancer when greater balancing capability is required.
Review the key electrical, environmental and communication parameters before confirming battery configuration and system compatibility.
Use these values for preliminary battery pack, inverter and current matching before final technical confirmation.
| Parameter | Specification |
|---|---|
| Model | B-48200-A |
| BMS Version | BMS 3.0 Type A |
| Nominal System Voltage | 48V |
| Battery Chemistry | LiFePO4 / NCM |
| LFP Configuration | 16S Typical |
| NCM Configuration | 14S Typical |
| Working Voltage Range | 40V – 59V |
| Charge Voltage Range | 48V – 60V |
| Typical Charge Voltage | 54V |
| Rated Charge / Discharge Current | 200A |
| Maximum Charge / Discharge Current | 210A |
| Current Limitation | 10A |
| Communication | CAN / RS485 ×2 |
| Monitoring | Bluetooth |
| Balancing | Passive Balancing |
| SOC Calculation | Supported |
| Active Balancer Control | Dry Contact Supported |
| Internal Resistance | < 2mΩ |
| Working Temperature | -20°C – 70°C |
| Storage Temperature | -40°C – 85°C |
| Ambient Humidity | 10% – 85% |
Check battery chemistry, series configuration, current requirements and communication compatibility before confirming your BMS selection.
Use the core product data below as a quick matching reference. Final compatibility should be confirmed against your battery pack and inverter requirements.
Share your battery chemistry, series configuration, nominal voltage, maximum current and inverter model. Our technical team can help confirm BMS compatibility before ordering.
Your project information will only be used to evaluate your inquiry and provide relevant product or technical support.