The Seplos PARA is a compact 12.8V 100Ah LiFePO4 deep cycle battery designed for RV, marine, UPS, backup power and other low-voltage energy applications.
With 1.28kWh of rated energy, the battery combines lithium iron phosphate chemistry with high-current capability in a compact enclosure measuring only 255 × 195 × 218 mm.
Its 50A continuous charge and discharge capability, together with up to 100A maximum current, makes the PARA suitable for applications requiring dependable 12V energy storage in a smaller and lighter battery format.
Seplos energy storage systems combine advanced battery protection, intelligent monitoring and practical system architecture to support stable operation, flexible integration and long-term project performance.
Review the key electrical, battery, communication and environmental specifications required for preliminary system evaluation and project planning.
Use these values for preliminary product comparison, inverter matching and energy storage project assessment. Final configurations should be confirmed with the Seplos engineering team.
| Parameter | Specification |
|---|
| Product Series | PARA |
| Nominal Voltage | 12.8 V |
| Nominal Capacity | 100 Ah |
| Stored Energy | 1.28 kWh / 1280 Wh |
| Battery Chemistry | LiFePO4 |
| Cycle Life | 4800 cycles @ 25°C, 0.5C charge/discharge |
| Continuous Charge Current | 50 A |
| Maximum Charge Current | 100 A |
| Charge Cut-Off Voltage | 14.6 V |
| Continuous Discharge Current | 50 A |
| Maximum Discharge Current | 100 A |
| Discharge Cut-Off Voltage | 10 V |
| Charge Temperature | 0–55°C |
| Dimensions | 255 × 195 × 218 mm |
| Weight | 12.3 kg |
| Communication | Not Specified |
| Protection Rating | Not Specified |
Technical specifications may vary by system configuration, battery module selection and project requirements. Contact Seplos for final engineering confirmation before procurement or system integration.
A connected energy storage architecture coordinates solar generation, grid power, battery charging and critical loads to support more flexible and resilient energy use.
Renewable energy is supplied to the site and excess generation can be directed to battery charging.
Grid electricity supports the site when required and can be managed according to project strategy.
Smart BMS and system controls coordinate charging, discharging, protection and energy dispatch.
Stored energy can help reduce peak demand, shift energy use and improve renewable energy utilization.
Selected equipment can receive stored power during grid interruptions, subject to system configuration.
Reduce high-demand grid consumption
Store excess solar energy for later use
Power essential loads during outages
Solar PV and grid sources supply power according to site conditions.
BMS and control logic monitor system status and available energy.
Energy is stored or released based on demand and project strategy.
Commercial and critical loads receive power through the configured system.
This Residential Energy Storage is designed for energy storage projects requiring flexible capacity, intelligent battery management and reliable power support.
Store excess solar energy during the day and use it at night to make better use of your solar power.
Keep essential home appliances running when the grid goes down, providing reliable backup power when it matters most.
Store electricity when rates are low and use it during peak-price hours to help reduce energy bills.
Power your home with stored energy and solar generation to reduce reliance on the grid or support off-grid living.
System voltage, communication protocol, inverter settings and site requirements should be confirmed before final configuration and ordering.
The final energy storage configuration depends on inverter compatibility, system voltage, communication protocol, load profile and the required backup duration.
Communication settings should match the selected inverter, EMS and project control requirements.
Inverter brand, model, voltage range and protocol compatibility should be reviewed before purchase.
The system can be integrated into a project energy management strategy subject to final configuration.
Seplos can review project requirements and help confirm a suitable battery system configuration.
Share your required capacity, inverter model, application and project location. The Seplos engineering team can help review compatibility and recommend a suitable system configuration.
Engineering review and final compatibility confirmation are recommended before ordering.
Your project information will only be used to evaluate your inquiry and provide relevant product or technical support.
